To paraphrase Vane Jones, "Knowledge is of little value until shared with others."

Friday, March 29, 2013

The Start of Year 2013

Thus far Year 2013 has not started off too well. However, two CA&E models have been completed. One of them is a model I've had for a number of years. The other was commissioned as a body and completed by me as an adjunct to the other.


Before going further, as work was being done with AEFRE #49, I had some problems. To resolve these a professional model maker is being consulted. More on this later in future posts.


Many years ago, perhaps in the 1970's, All Nation Hobby Shop had a small number of scratch built brass O scale traction models for sale. Due to the length of time between when the models were available and my ability to find out more about them, "stories" changed with the dimming of memories. 


Unfortunately All Nation Hobby Shop never disclosed who scratch built the 4 models.


The story goes, there were 4 models, in no particular order - Model #1, obtained by me, a completed CA&E #312 Kuhlman powered with 4 Multi-Units painted in the "coffee and cream" color scheme of the 1930's. The side passenger doors opened as well as the traps. The paint was "marred" with what looked like oil stains.
This is the model before striping of the paint started. Some of the discoloration can be seen on the letterboard.



Model #2 Now owned by a modeler on the West Coast, a completed CA&E # 315 Kuhlman powered with 4 Multi-Units painted in the "coffee and cream" color scheme of the 1930's. The side passenger doors opened as well as the traps.


Model #3 Now owned by a modeler who lives in Chicago, a completed CA&E unknown car number Cincinnati Car Co.  unpowered painted in the "coffee and cream" color scheme of the 1930's. The side passenger doors opened as well as the traps.


Model #4 Now owned by a modeler in Wisconsin, a completed painted TMER&L car the Mendota which was originally powered  with Multi-Units. The side passenger doors opened as well as the traps.


Back to my model, besides the spoiled paint scheme, the lettering was wrong, and the Multi-Units, while still running were starting to show their age. Whoever scratch built the model did a fantastic job down to a complete underbody and clips to hold the glazing in place. The roof is of a true clerestory design with large frosted white "pea" bulbs.


Those of you who have scratch-built a model know there is a point where having everything down to scale is impossible. You can have parts the exact scale size but they break or break off at the slightest touch.  The builder of this model had just reached this point. To prevent solder joints from coming apart, some items were made into sub-assemblies and attached with screws.
As you can see the underbody includes all the air and brake piping found under an interurban. The mounting for the coupler can be seen. Unfortunately the pilots were mounted using brass of prototype cross section and were too fragile. The pilots will be replaced with lost was castings. The 2 large holes in the floor were for the wiring to the Multi-Units. Other detail can be seen. Much of the underbody detail is mounted using small screws.



The other "problem", if it could be called that, were the use of soft metal cast seats. This made for an extremely heavy model. The seats were glued to the floor.


 It was obvious a complete rebuilding was in order. The model was taken apart with the parts stored in various labeled containers. As a hint, no longer used, empty plastic prescription containers are great.



The model came with Kemtron, now Precision Scale Co., Baldwin 7830 sideframes. I know these series of cars used 8440 sideframes, but few individuals will be able to pick out the difference. The Multi-Units were take out and the sideframes sent off to Q-Car Co. to have new power units installed.
These are the power trucks as rebuilt by Q-Car. The model is to be double powered due to the weight of the brass model with interior plus the potential weight of the trailer. The star burst journal lids were available in the past.



Once the model was dissembled, the body was placed in a container of paint remover for a few days. Follow the instructions to the "letter of the law" to get best results. Wear chemical resistant gloves during the paint removal and clean-up process. Use small brass brushes to scrape the paint-paint remover "yuck" off of the body. Completely clean out the interior of the model also.


As the paint removal process was underway I discovered the partition between the smoking and non-smoking sections and the lavatory while made from brass were glued in place.


When done removing the paint-paint remover "yuck" from the body clean up the body with hot soapy water and allowed to dry.  Strain the used paint remover and/or dilute it with enough water so you can see any small parts!


One giant word of CAUTION - During the paint removal process and the following cleaning of the model plus the disposal of the used paint remover - be aware of any parts which may have fallen off the model.  


The small pieces of milled brass used for the anticlimbers on the ends of the model were found in the "washings" from the container of  paint remover. The 2 anticlimbers had been glued on to the ends of the car.


More to come! Cheers,
Ed

Tuesday, March 26, 2013

Jean Deschenes July 11, 1932 - March 1, 2013




The following message was received on Saturday March 2, 2013 via email from Jean's wife Nancy,

"I am sorry to tell you that Jean passed away yesterday after spending over 2 weeks in the hospital with Legionaries Disease. He enjoyed knowing you and doing business with you over the years." 



Jean and I first met at an East Penn Traction Club Meeting. Jean had scratch built a model of the CSS&SB 1100 line car along with the a companion reel car for himself. 



Being a fan of the CSS I asked Jean to build a model of the 1100 for me. 




This was the start of a long friendship in which Jean scratch built a few models for me. Jean's style of building models was with the roofs attached to the sides of the car. The floors were removable. Car interiors were either attached to the floors and/or built on false floors which were attached to the sides of the model. He would often make the entire interior from wood, including the seats.


I prefer models where the roofs removable and the sides attached to the floor. Jean was flexible and adaptable in what he did.  He would be sent a list of very specific instructions with plans and photos along with the parts and sometimes sub-assemblies for the model.  The parts included lost wax or soft metal castings while others were made from epoxy or plastic.



Jean painted models with a brush using artist acrylic paint purchased from the local Micheal's store. His brush strokes were so even and well applied, it was extremely difficult to tell the model was not air brush spray painted.


Jean was always up for a challenge.  A model of the CA&E #11 line car was requested. I didn't have plans but instead only photos. To me this model best demonstates Jean's talents.


Jean painted #11 in the final painted scheme as was the prototype. 





Jean included what he thought the interior of a line car should have.



Photos taken through the rear door window of the model.




The side doors could be closed just in case it was too cold outside.


Jean included all the roof detail with a working, rotating platform for the line crew. The sides of the platform open up.



Jean did all the work you saw in the photos with the exception of a method of attaching the roof to the model


Because of my requirement for the  roof to be removable, Jean shipped the "finished" model to me to have the balance of the electrical connections completed and well as a method of anchoring the roof to the balance of the model.


Jean had a dry humor. All I had to do is to mention three words to him - "Old Orchard Beach". This would provide 5 to 10 minutes of comments. It is one of those things you had to have experienced for Jean's comments to make sense.


Jean and Nancy would go on vacation by taking a sailing cruise on one of the schooners which would travel in and about the islands off the coast of Maine. Besides making model of trolley he also made ship and other models.


As taken from Jean obituary notice, "The family requests that flowers be omitted and a donation made to THE CONGREGATIONAL CHURCH OF GRAFTON, 30 GRAFTON COMMON, GRAFTON, MA 01519."


Jean may you have "Fair Winds and Following Seas".


Cheers,
Ed



























  

Saturday, March 2, 2013

Bill Olson December 9, 1927 - February 11, 2013

Bill Olsen trolley modeler of Minneapolis, MN passed away on February 11, 2013. Bill had suffered with Parkinson’s disease for some years and it gradually caused weakness, loss of motor skills and even communication. 


Quoting Dick Stonner, "Bill was the kindest, most gentle guy I have known. I never saw him angry and whenever things were not going right his usual comment was ”Oh dear God!” He willingly gave of his time, skills, and money to many causes and was a generous supporter of the Minnesota Streetcar Museum and his church.

"He helped many new modelers with information, guidance, parts and kits from his vast stock of trolley stuff. All of us local modelers often gathered at his house for model work, videos and treats. He was the driving force behind the building of our twenty section O gauge trolley modules. He was very social and loved going out for lunch and sometime during the meal he would remark 'My, this is good.' Yep, food was a delight to Bill and oh yeah, dessert (which he called a trifle was always part of the occasion."


Bill would show up with small, well detailed O scale trolley layouts. The models ran perfectly on the layout. The scenery on the layout was so great, it was easy to forget you were watching  a layout 36" square or smaller.


Bill would always challenge you to do the same or better. We will all miss Bill. Please feel free to post any comments you may have about Bill Olson.

Sunday, December 16, 2012

2012 Merry Christmas and a 2013 Happy New Year

To all of you a very  Merry Christmas and a Happy New Year. May you enjoy the holidays with family and friends.






This year the Chicago North Shore and Milwaukee Ry. was chosen to be in our Christmas card. The model if of a  1922 Cincinnati Car Co. express car. They were more commonly called "Merchandise Dispatch" cars on the North Shore Line (NSL). In the 1920's after the NSL passenger equipment was painted in the orange and maroon paint scheme the express cars were painted the same.


Instead of "Where's Waldo?", where is the pink flamingo? Click on the photo if your eyes need help.


Peace to all of you,
Ed

Sunday, November 18, 2012

A Comparison of NSL Merchandise Dispatch Paint Schemes

Part of this post was an email I sent to some of my friends. One of them commented the info should be posted in my blog. This gives me a chance to get into a favorite idea of mine - comparing models of the the same prototype car or series of cars.


Looking at someones model gives you a chance to look deeper into the interest and interpretation of the prototype by the modeler. After all, the finished model is the representation of what the prototype looked like to the individual who made the model.


Maybe it's time to get out of the esoteric and back to real life. This is a comparison of the North Shore Lines (NSL) 203 to 214 series of express cars. Just so there is no confusion these cars were also called Merchandise Dispatch (MD) or merchandise cars.   


Everyone has looked at both black & white and color photos of NSL cars. After a while some of the paint schemes become blurred in our minds. We can all recall the paint scheme of the cars we have seen running or in which we rode many years ago.


The NSL's MD cars present an interesting study. Many years ago O scale kits were available to build the 203 to 214 series - the 4-baggage (1 at each corner of the body) door style or the 215 to 239 - the 2-baggage (center) door version. I obtained 2 of the 4-baggage door kits with the idea of running them in a train. Why I didn't get 1 kit of each version is lost to the past!


Two events happened within the past week which caused me to get into the topic of comparing the paint schemes of similar models. These were the 2012 TrainFest in Milwaukee and a "Trolley Nite" held by one of the local fellas, Terrell Colson. As we go along you will see how these 2 events came into "play".
 
 
Starting with the "Trolley Nite", one of the attendees, Ralph Nelson, brought his NSL MD cars. This models were 1 MD car pulling 3 refrigerator trailers.
 
 
Ralph's models were painted in dark green with gold lettering. In the early 1900's before Insull's take-over of the NSL, when the North Shore set its goals on being a major intercity railway all of its equipment was painted in a dark green with gold lettering. Both the passenger and MD cars were paint this way. The 1st 2 photos were taken on Terrell's layout.
 
  
This is the complete train of Ralph's models. Of interest to note, early NSL trains ran without headlights.


Sometime in the 1920's after Insull took over, passenger and MD cars were painted orange with maroon trim. The lettering on the cars was the same. The next 2 photos are my models taken on my layout.

 
After the depression set in, all service (passenger and freight) was hit hard. As revenues dropped, the NSL looked for ways to reduce cost. One way was to cut the cost of repainting equipment. Since the MD service had been reduced to almost nothing, the paint scheme of the MD cars was reduced to all orange with black lettering. This is the paint scheme which lasted until the end of the NSL in early 1963.
 
 
Don't ask why I painted one model in the orange and maroon and the other in the all orange. I've forgotten! The other question I ask myself is why didn't I get one of the 2-baggage door kits back then. 
 
There are both of the O scale kits available on EBay. I have enough other models to complete so I will not be increasing my roster of NSL MD cars.
 
 
The other variation on the MD paint schemes is the WW II red, white, and blue "Buy U.S.War Bonds" scheme. The preprinted sides were available in an O scale kit form, I think.  Some how this paint scheme didn't appeal to me back then. However, it does look good to me now! Times have changed!
 
 
To complete the paint schemes, here is Eric Bronsky's HO model as it appeared at the 2012 TrainFest.  The photo was taken as the model sat in a siding on one of the many modules of the Northwest Traction Group.  Someone I know has one of the O scale models of the "Buy U.S. War Bonds" car but I don't know who it is. I've searched my photo files without any luck.
 
 
Thanks to color photography, or today it should be called electronic photography,  the various NSL paint schemes used on the MD cars can be seen. I hope you have enjoyed the comparisons of the color schemes as well as the models.
 
 
As you look at the models think of them as the representation of what the prototype looked like through the eyes of the individual who made the model.



Cheers,
Ed

Thursday, November 1, 2012

The Tale of Two Fives



In 1946 the Aurora Elgin & Fox River Electric Company pulled down the trolley wire and dieselized. The Elgin State Hospital and the Kerber Packing Company were customers of the electric line and still required railroad service.


A General Electric 45-ton diesel locomotive was purchased to serve these remaining freight customers. The locomotive was numbered No. 5. A diamond shaped logo was painted on the side of the locomotive along with the railway's name and the locomotive's roster number.


Over the years small diesel locomotives were made and imported in brass for the O scale market. There were 44-ton and 70-ton models. Then, a few years ago Rich Yoder http://www.richyodermodels.com/ imported a 45-ton model in brass.


This was it! Rich Yoder had made and imported other freight cars which I owned. They are extremely fine models for the cost. The new 45-ton locomotive was also a star! It runs well plus the detail is all there.


This is the model, when just like the AEFRE, my trolley wire comes down, and a small layout with a few freight cars can be made to keep me occupied.
My model is painted and lettered for the 1946 era.
No. 5 pulling one of Rich Yoder's High Walkway Tank Car and a pink Chateau Martin express car.
Don Bruno also purchased a 45-ton model. He wanted his painted and lettered for the time when the AEFRE stopped freight service and became a Trolley museum.
No. 5 is pulling a Rich Yoder Mathieson Dry Ice Car.


Some comments about the 2 models are warranted. The decal used on the 1946 version of No. 5 was available from Walthers in both HO and O scale.  Years ago Walthers had many interurban decals available. Some were small runs. The small run decals were packaged with hand-written labels while others were packaged in typed labels.


For the newer era No. 5 Paul Mayer of Shore Line Decals made the decals. A link to  Shore Line Decals appears at the bottom of this page.


Paul has a drawing of the 1946 era AEFRE decals and potentially can make these decals upon request. I believe Paul can make both of the diesel era AEFRE decals in HO scale also.


If you scrutinize the under bodies of both No. 5's you may notice they do not match. In assembling the models, one has the under body reversed. 


The models run smooth and without any problems when operated straight out of the box. However, they ran faster than the prototype. For this reason I wired the 2 can motors in the hoods in series. Now both models run smoothly and slow! 


Both models have 2 horns, one on each hood. The prototype probably has only 1 horn. For the O scale models, HO scale horns were used. On the prototype the horns are small!


Finally for Don's model, the newer era, I had problems painting the louvers in the ends of the hoods in the alternating black and orange. Don instructed me to paint the louvers all black.


To give you an idea of Rich Yoder's attention to detail here is the interior floor with the operator's controls and seat. There is only 1 operator position next to the side window of the cab even though the locomotive can be operated in both directions and where the operator may have to move from one side of the cab to another to see the trainmen on the ground assisting in the operation.


Here is the operator "glued" in his seat using a generic "DAP Kwik Seal" adhesive. The adhesive is white now but will cure to a clear which is hard to see.


Rich Yoder has sold out of the O scale 45-ton locomotive. They will show up on EBay or train meets.


If you desire to see the actual prototype No. 5, visit the Fox Valley Trolley Museum http://www.foxtrolley.org/  . After enjoying your visit and perhaps a ride you can become a member.

Cheers,
Ed

Wednesday, October 17, 2012

Model Not Running & The Electrical Short Circuit

The very item which makes a trolley model unique can also be the model’s undoing. You place a trolley model on the track, place the trolley pole (pan) on the wire, turn on the power, and nothing happens.


The over all problem may be non-conductive oxidation or dirt on the wire, trolley pole slider or wheel, track, or wheels. OR, the model no longer runs due to an electrical short circuit.


If you routine for getting the model to operate due to non-conductive oxidation or dirt does not work, STOP trying to pass electrical current through the model!


When the problem is due to an electrical short circuit, the amperage of the power supply can be passing through the entire wiring of the model including the trolley pole.

 
Resistance in an electrical circuit causes the conversion of the electrical energy into heat energy (heat). The heat can cause problems. Soldered joints in models or wiring will un-solder causing wires to come apart and brass models to deform and come apart. Wire, which is metal in a thin, dawn-out form, will not only deform but will lose other physical properties.

 
The reason for this post is the affect of an electrical short circuit has on the trolley pole! When the total amperage of the power supply goes through the trolley pole; the wire used for the trolley pole, the material used for the trolley shoe or wheel and trolley base, the springs, and the screw and/or material used to hold the trolley pole to the roof of the model will be affected.

 
The most common affect I’ve seem is the deformation of the springs. First the springs will become hot and then glow until the electric current is turned off. After this the springs are soft and stretched-out. The springs will no longer hold the trolley pole up to the trolley wire. The only way to get the trolley pole to work again is to replace the springs.

 
Recently I obtained a streetcar which would not run when placed on my test track. The test track is a 36” long straight piece of track with overhead wire. An old power supply is used to power the test track. To see the amount of current used both a voltmeter and ammeter are part of the electrical circuit.
This photo is the power supply installed at 1 end of the test track.
From left to right - a brass rod line side pole with the positive power supply attached with an alligator clip.
At the bottom right is the negative power lead attached to the track.
The black electrical panel part in the center contains the 2 meters.
The black wire coming out of the panel is the positive and negative power leads with alligator clips.
The use of the toggle switch in the bottom center of the panel is unknown.
The toggle switch at the bottom right of the panel controls the direction.
At the right is the small but useful power supply. 

 
The voltmeter and ammeter are an important part of the circuit. You can tell immediately the electrical “condition” of the model or whatever is connected to the wire leads of the power supply.

 
Recently to test a newly acquired non-operating model (without disassembling the model or placing it on the test track) the positive (red) lead was connected to the trolley pole and the negative (black) lead to the power truck. The model didn’t run.


Next, the trolley pole was removed (unscrewed) from the model. The pole unscrewed unevenly from the model (This turns out to be an interesting observation.). The positive lead was attached to the 2-56 screw sticking out of the model’s roof. The model still didn’t run.

 
I knew there was an electrical short circuit in the model. Without knowing exactly where the short was, I decided to replace the “wiring” from the inside of the trolley base to the motor lead outside the model on the floor exterior. This was estimated to be a 30 minute task.

 
Without going into too much of a discussion, the model was wired-up so the power truck could be easily electrically disconnected from the model. At the same time the negative ground was brought-up into the model. This later part was done for the future installation of interior lighting in the model.

 
Back to my interesting observation of the difficult trolley pole removal from the model – it’s the reason for this post. The correct trolley pole base for the model is a 4 or 2 spring vertical. This was on the model when I got it. Observation of the trolley pole base disclosed the vertical part of the base was curved.

 
The springs were removed to be able to better see the base and perform corrective actions. The vertical part of the base was deformed when the full amount of electrical current of the power supply went through the trolley pole. The piece of metal heated up enough to become soft. The action of the springs was strong enough to cause the heated piece of metal to take on an “S” shape.
 

The part of base which was deformed was a lost wax casting. Small protrusions were filed off. Then the trolley base was placed in a vice to apply enough pressure to straighten the metal casting.
 
 

The springs were replaced and the trolley pole moved up and down without any problems. To blacken the part of the trolley pole which had deformed, the lower portion of the trolley pole was dipped into Neolube #2. At the same time this will improved the electrical connection where the 2-56 screw, screws into the trolley base. Allow the Neolube to dry first before attaching the trolley pole to the model.
 

 
The bottom line of this post is when 1st testing a model which you have never seen run, test it with a power supply having both amp and volt meters. If there is a short, high amperage draw for a comparable model, immediately turn off the power to avoid any damage to the electrical circuit.

 
If a model with an electrical short circuit is allowed to have high amperage go through the model for an appreciable length of time, inspect the model including the trolley pole for damage. The trolley pole may have been damaged in a way which alters the geometry of the shoe or slider and the trolley wire.


Trolley poles are expensive. But at the same time they are the part of the model which sets it apart from other railway models.

Cheers,
Ed